Fast Mover 50ml 2K Plastic Repair Gun Kit Including Glue Cartridge And Nozzles

The Fast Mover 50ml 2K Plastic Repair Applicator Gun is used for repairing plastic parts, especially in automotive and industrial applications. It works with a 2-component (2K) adhesive, usually consisting of glue in a dual cartridge system (resin and hardener) that is dispensed in the correct ratio.

Here’s how to use it:

1. Prepare the Surface

• Clean the surface to be repaired. Make sure there is no dirt, grease, or dust on the plastic surface.
• For better adhesion, lightly sand the surface and wipe with a suitable cleaning agent.

2. Load the Glue Cartridge

• Insert the 50ml glue cartridge (with the resin and hardener) into the applicator gun.
• Attach the mixing nozzle to the top of the cartridge, ensuring it's securely fastened.

3. Apply the Adhesive

• Squeeze the trigger of the applicator gun to dispense the adhesive. The gun will mix the resin and hardener in the correct ratio as it pushes the product through the mixing nozzle.
• Apply the glue directly to the damaged area on the plastic.

4. Spread and Position

• Use a spreader to ensure the adhesive evenly covers the repair area.
• If necessary, hold the pieces together or use clamps while the adhesive sets.

5. Curing

• The adhesive usually starts to set quickly (depending on the product, curing times can vary from a few minutes to several hours).
• Allow the adhesive to fully cure before sanding, painting, or further use.