MIPA BC-Ready Mixed Super Black 2-Layer Base Painting 1 Litre

MIPA BC-Ready Mixed Super Black is a 2-layer base paint designed for automotive refinishing. Here are some key points about its usage:

1. Preparation:

   • Ensure that the surface to be painted is clean, dry, and free of contaminants.
   • Sand the surface if necessary to promote adhesion.

2. Mixing:

   • Although it’s a ready-mixed product, it’s essential to stir it well before use to ensure an even consistency.

3. Application:

   • Apply the base coat using a spray gun at the recommended pressure (usually around 2.0-2.5 bar).
   • Apply multiple thin layers rather than a single thick layer to prevent runs and ensure even coverage.

4. Drying:

   • Allow adequate drying time between coats. The specific drying time can vary based on environmental conditions and the manufacturer's guidelines.

5. Topcoat:

   • After the base coat is dry, it should be covered with a clear coat to enhance durability and finish.

6. Cleanup:

   • Clean tools and equipment with appropriate solvents immediately after use.

7. Safety:

   • Always wear appropriate personal protective equipment (PPE), including gloves, goggles, and a respirator, when handling and applying paint.

For detailed application instructions and technical data, it's best to refer to the product's technical data sheet (TDS) provided by MIPA.