DUREN Cordless 2 SPEED 75mm Polisher for finishing surfaces with Batteries, Pads

The DUREN Cordless 2 SPEED 75mm Polisher is designed for detailing and finishing small surfaces such as car bodywork, headlights, and other compact areas. Here's how you can use it effectively:

Features and Usage:

1. Cordless Design: Being cordless, the polisher allows freedom of movement without being restricted by wires, making it easier to work on hard-to-reach areas.

2. 2 Speed Settings:

   • Low Speed (for Finishing): Use the lower speed for delicate surfaces or final finishing touches to avoid over-polishing or burning the surface.
   • High Speed (for Buffing/Polishing): The higher speed is ideal for applying polishes or waxes and for removing swirl marks or light scratches.

3. 75mm Pad Size: The smaller pad size (75mm) makes it ideal for precise work, like polishing small panels, headlights, or tricky areas such as bumper corners, mirrors, or door handles.

Steps for Using the Polisher:

1. Prepare the Surface: Clean the surface thoroughly to remove any dirt or debris that may scratch the surface during polishing.

2. Attach the Correct Pad: Use a foam or microfiber pad depending on your needs. For finishing or light polishing, a soft foam pad works best.

3. Apply the Product: Apply a small amount of polish, wax, or compound onto the pad or surface. Spread it evenly across the area you’re working on.

4. Start Polishing:

   • Use the low speed for delicate finishes.
   • Press lightly against the surface and move the polisher in slow, overlapping passes.
   • Avoid staying in one spot for too long to prevent over-polishing or burning the paint.

5. Inspect the Finish: After polishing, wipe down the surface with a clean microfiber cloth to remove any residue and check the finish. Repeat the process if needed.

6. Finishing Touches: Once satisfied with the finish, apply a protective layer like wax or sealant if required.