Fast-Mover 2K Adhesive Plastic Repair Gun with Metal Handle

The Fast-Mover FMT6335 50ML Cartridge 2K Adhesive Plastic Repair Gun is typically used for bonding and repairing plastic components in automotive, industrial, and other sectors. Here's a general guide on how to use it:

Steps for Using the FMT6335 2K Adhesive Repair Gun:

1. Prepare the Surface:

   • Clean the surfaces to be bonded or repaired using a suitable solvent to remove dirt, grease, and contaminants. A roughened surface will help ensure better adhesion.
   • Ensure the surface is dry before applying the adhesive.

2. Load the Cartridge:

   • Insert the 50ml 2K adhesive cartridge into the FMT6335 gun.
   • Make sure the cartridge is secure and seated properly.
   • Attach the mixing nozzle to the cartridge. The nozzle ensures that the two components of the adhesive are mixed in the correct ratio as they are dispensed.

3. Prime the Adhesive:

   • Before applying to the surface, dispense a small amount of adhesive through the nozzle to ensure proper mixing.
   • Check that the adhesive is coming out smoothly and in the right proportion.

4. Apply the Adhesive:

   • Squeeze the trigger on the gun to apply the adhesive to the repair area.
   • Spread the adhesive evenly along the surface where the bond is required.
   • Apply the adhesive in a controlled and consistent manner for an even application.

5. Clamp or Hold the Parts:

   • Once the adhesive is applied, align and press the two parts together.
   • If needed, clamp or hold the parts in place until the adhesive sets. Most 2K adhesives set quickly, but full curing times can vary based on the product.

6. Curing:

   • Allow the adhesive to cure according to the manufacturer's recommended time. This can vary from a few minutes to a few hours depending on the specific adhesive.
   • Avoid disturbing the bond while curing.

Safety Precautions:

• Use in a well-ventilated area.
• Wear gloves to protect your skin from contact with the adhesive.
• Follow any specific instructions provided by the adhesive manufacturer.