Hammerite Stone Chip Shield Aerosol Spray Paint - Black, Grey, White

The Hammerite Stone Chip Shield Aerosol Spray Paint provides a protective coating for surfaces prone to chipping and abrasion, typically used in automotive applications. Here’s a breakdown of its usage and benefits:

Usage

1. Surface Preparation: Clean the area thoroughly to remove dirt, grease, and loose rust. Ensure the surface is dry and free from any contaminants.
2. Masking: Mask off areas that you don't want to paint to prevent overspray.
3. Shaking the Can: Shake the aerosol can vigorously for a minute or two to mix the contents thoroughly.
4. Application:
   • Hold the can about 15-20 cm away from the surface.
   • Spray in light, even strokes, slightly overlapping each pass for full coverage.
   • Apply multiple thin coats rather than one thick coat to avoid runs.
   • Allow each coat to dry for about 10 minutes before applying the next.
5. Drying Time: The paint is typically dry to the touch within 30 minutes, but full curing may take up to 24 hours.
6. Finish: For optimal durability, apply a clear topcoat once the Stone Chip Shield has dried.

Benefits

• Protection Against Stone Chips: Shields surfaces from damage caused by stones, debris, and weather.
• Rust Prevention: Helps prevent rust formation on metal surfaces, prolonging the life of the vehicle or other metal equipment.
• Flexible Coating: The paint forms a flexible coating that resists cracking and peeling.
• Color Variety: Available in black, grey, and white, allowing for versatility in appearance and application.

The Hammerite Stone Chip Shield is ideal for use on underbodies, wheel arches, sills, and other exposed areas prone to wear.