TROTON Gold Line Light sand Putty 1 Ltr Glass Fibre

The TROTON Gold Line Light Sand Putty with glass fiber is a specialized body filler designed for automotive repair. Here's a guide on its typical usage:

1. Surface Preparation: Clean and dry the area to be repaired. Remove any dirt, grease, or old paint using a suitable cleaner, and sand down the surface with abrasive paper to ensure adhesion.

2. Mixing: The putty should be mixed with a hardener in a recommended ratio (usually 100 parts of putty to 2-3 parts of hardener). Mix until you achieve a uniform color, indicating a complete blend.

3. Application: Apply the putty with a spreader in thin layers. The putty is designed to fill deeper dents or areas requiring structural support, as the glass fiber in the putty adds strength and durability. It's ideal for use on both metal and fiberglass surfaces.

4. Drying Time: Allow the putty to cure fully. Depending on temperature and humidity, the drying time can vary, but typically it's around 15-20 minutes.

5. Sanding: Once cured, sand the surface smoothly with coarse to finer grit sandpapers. This putty sands easily, allowing for a smooth finish.

6. Finish: Apply a primer or paint over the sanded area to complete the repair.