MIPA QUICK PRIMER AEROSOL 500ML LIGHT GREY SPRAY - SPOT PRIMER

Mipa Quick Primer Light Grey is a versatile primer typically used in automotive and industrial applications. Here are some general guidelines for its usage:

1. Surface Preparation: Ensure the surface is clean, dry, and free from dust, grease, and rust. Lightly sand the surface if necessary to improve adhesion.

2. Application Method: You can apply Mipa Quick Primer using a spray gun, airless sprayer, or aerosol can. If using a spray gun, make sure to use the appropriate nozzle size and pressure settings.

3. Thinning: If necessary, Mipa Quick Primer can be thinned with Mipa thinner to achieve the desired viscosity. Follow the manufacturer's recommendations for the appropriate thinner and dilution ratio.

4. Coats: Apply one or two coats, allowing adequate drying time between coats. Typically, a flash-off time of about 10-15 minutes is recommended, but this can vary based on environmental conditions.

5. Drying Time: Mipa Quick Primer usually dries quickly, but drying times can vary depending on the thickness of the application and environmental conditions. Refer to the product datasheet for specific drying times.

6. Topcoat: Once fully dry, you can apply your topcoat. Ensure that the primer is adequately cured before applying paint.