MIPA CPE 2K ACRYLIC KLARLACK 2-1 SATIN CLEARCOAT LACQUER 1LTR

The MIPA CPE 2K 2:1 Satin Clearcoat Lacquer is a high-quality, two-component clear coat used to provide a durable, satin finish on painted surfaces, particularly in automotive applications. Here’s a basic guide on its usage:

1. Mixing Ratio: This clearcoat should be mixed in a 2:1 ratio with the appropriate MIPA hardener. This means two parts of the clearcoat to one part of hardener.

2. Application Surface: It's typically used over a basecoat, providing a satin finish that is both protective and aesthetically pleasing. Make sure the basecoat is fully dry and clean before applying.

3. Application Method:

   • Apply with a spray gun, using even, consistent passes to avoid uneven texture or thickness.
   • It's recommended to apply 1-2 coats, with a flash-off time between coats (usually around 5-10 minutes, but check the product’s technical sheet for specific details).

4. Drying Time:

   • The drying time can vary depending on temperature and humidity but typically requires 15-30 minutes at room temperature for touch-drying. Full curing may take 24 hours or more, depending on conditions.

5. Final Finish: The satin clearcoat will provide a semi-matte look. If a glossier or matte finish is desired, MIPA offers other products to suit those needs.

6. Clean-up: Clean equipment immediately after use to prevent clogging, as this product cures quickly.