TULDA HT60 HS SPEEDLINE 2K MULTIHARD HARDENER FAST MULTICLEAR

The TULDA HT60 HS Speedline 2K Multihard Hardener and Fast Multiclear are typically used in automotive refinishing and industrial applications. Here’s a general overview of their usage:

TULDA HT60 HS Speedline 2K Multihard Hardener:

• Type: It’s a two-component (2K) hardener, meaning it requires mixing with a compatible base (usually a paint or clear coat) to activate its curing properties.
• Usage:
  • Mix with the recommended TULDA paint or clear coat at the specified ratio (usually indicated in the product datasheet).
  • Ensure thorough mixing to achieve optimal performance.
  • Apply in suitable environmental conditions (usually between 15-25°C for best results).
  • Allow proper curing time as per product specifications.

Fast Multiclear:

• Type: This is often a clear coat used to provide a glossy finish and protection over painted surfaces.
• Usage:
  • Mix with the appropriate hardener, following the manufacturer’s instructions.
  • Spray application is common, using a suitable spray gun setup.
  • Aim for even coats, typically 2-3 layers, allowing for flash time between coats.
  • Curing times may vary, but ensure the surface is fully cured before exposing it to heavy use.

General Tips:

• Safety: Always wear appropriate personal protective equipment (PPE), including gloves and a mask, when handling and applying these products.
• Preparation: Ensure the surface is clean and properly prepared for optimal adhesion and finish.
• Storage: Store any unused components according to the manufacturer's recommendations to maintain their effectiveness.