U-POL Isopon Plastic Bumper Repair Filler Ultra Flexible 250ml PBF/250

The Upol Isopon Plastic Bumper Repair Filler is specifically designed for repairing plastic parts on vehicles, especially bumpers, as it’s ultra-flexible and durable. Here’s a basic guide to its usage:

Instructions for Use

1. Preparation:

   • Clean the Surface: Make sure the damaged area is clean and dry. Remove any dust, grease, or loose paint using a suitable cleaner or degreaser.
   • Sand the Area: Use a fine-grade sandpaper to lightly sand the damaged area. This will help the filler adhere better.

2. Mixing:

   • Combine Filler and Hardener: Squeeze a small amount of filler onto a mixing board or similar flat surface. Add the recommended amount of hardener (usually a pea-sized amount of hardener per golf ball-sized amount of filler). Mix thoroughly until a uniform color is achieved.
   • Work Quickly: The mixed filler will start to harden within a few minutes, so be ready to apply it promptly.

3. Application:

   • Apply the Mixture: Using a spreader, apply the mixed filler to the damaged area. Press down firmly to ensure good contact, especially if the damage is deep.
   • Build Up in Layers if Needed: For larger repairs, it’s often better to apply the filler in thin layers, allowing each to dry before applying the next.

4. Curing and Sanding:

   • Allow to Cure: Leave the filler to cure completely (usually around 20 minutes, depending on temperature).
   • Sand the Surface: Once fully cured, sand the area with fine sandpaper to achieve a smooth finish. For best results, finish with an extra-fine grit sandpaper.

5. Painting (optional):

   • Primer and Paint: If needed, apply a plastic primer, followed by the desired paint to match the vehicle’s color.

Safety Precautions

• Ventilation: Use in a well-ventilated area or with a respirator if working indoors.
• Protective Gear: Wear gloves and eye protection to avoid contact with the skin and eyes.
• Storage: Store in a cool, dry place away from heat and direct sunlight.