MIPA 2K CLEARCOAT CA 1-LITRE

MIPA CA DTM 2K Clearcoat is a high-quality clearcoat used primarily in automotive refinishing. Here are some key points about its usage:

Application

1. Preparation: Ensure that the surface to be coated is clean, dry, and free from contaminants. Sanding the surface may be necessary to promote adhesion.

2. Mixing: This is a two-component product. Mix the clearcoat with the appropriate hardener according to the manufacturer's instructions, usually in a ratio of 4:1 (clearcoat to hardener). Add any recommended thinner if necessary.

3. Spraying: Use a spray gun suitable for automotive applications. Adjust the spray pressure and nozzle size according to the manufacturer's specifications. Typically, a 1.3 to 1.4 mm nozzle is recommended.

4. Application Technique: Apply the clearcoat in several light to medium coats, allowing each coat to flash off (dry to the touch) before applying the next. The recommended thickness per coat will be specified in the product's technical data sheet.

5. Drying: Follow the recommended drying times for both dust-free and complete cure. Keep in mind that environmental factors such as temperature and humidity can affect drying times.

Safety

• Always wear appropriate personal protective equipment (PPE), including gloves, goggles, and a respirator, when handling and applying the clearcoat.
• Ensure proper ventilation in the workspace to minimize inhalation of fumes.

Storage

• Store the mixed product in a cool, dry place and use it within the specified pot life to ensure the best results.

Tips

• Test the clearcoat on a small area first to check for compatibility and finish.
• Follow any specific instructions provided by the manufacturer for best results.