MIPA P51 GLASS FIBRE FILLER GREEN PUTTY WITH HARDENER 1.8KG

MIPA P51 Glass Fibre Filler Green Putty with Hardener (1.8 kg) is a high-performance filler designed for automotive and industrial applications. Here are some key details about its usage:

Usage Instructions:

1. Surface Preparation:

   • Ensure the surface is clean, dry, and free from grease, dust, or rust.
   • Sand the area to be filled to promote better adhesion.

2. Mixing:

   • Use the provided hardener to mix with the putty. The typical mixing ratio is around 2% hardener to 100% filler, but check the product's specifications for precise ratios.
   • Mix thoroughly until the color is uniform, ensuring there are no streaks.

3. Application:

   • Apply the mixed putty using a spatula or filling knife.
   • Fill the damaged area in layers if it’s deep, allowing each layer to cure before applying the next.

4. Curing:

   • Allow the filler to cure completely. The curing time can vary depending on temperature and humidity, but it usually takes around 30 minutes to an hour.
   • Avoid excessive heat, which can cause the filler to cure too quickly and lead to cracking.

5. Finishing:

   • Once cured, sand the filled area to achieve a smooth finish.
   • It can be painted over once sanded, ensuring proper adhesion of the paint.

6. Clean Up:

   • Clean tools with a suitable solvent before the filler hardens.

Safety Precautions:

• Wear gloves and a mask while handling the filler and hardener to avoid skin and respiratory irritation.
• Ensure good ventilation in the working area.

This product is suitable for use on various substrates, including metal, wood, and fiberglass. Always refer to the manufacturer’s instructions for specific guidelines.