NOVOL PROFESSIONAL NOVAKRYL 590 ACRYLIC CLEARCOAT HS LACQUER 5LITRE CAN

NOVOL Novakryl 590 is a high-quality acrylic lacquer often used in automotive refinishing and industrial applications. Here are some general usage guidelines:

1. Surface Preparation: Ensure that the surface is clean, dry, and free from dust, grease, and contaminants. If needed, sand the surface to create a good adhesion profile.

2. Mixing: Novakryl 590 is typically used as a two-component system. You may need to mix it with a hardener (follow the manufacturer’s instructions for the correct ratio). Stir the mixture thoroughly to ensure an even consistency.

3. Application: You can apply Novakryl 590 using a spray gun, ensuring the nozzle size and pressure settings are appropriate for the lacquer. Apply in thin, even coats to avoid runs and drips. It’s usually recommended to apply 2-3 coats, allowing adequate flash time between coats.

4. Drying: Follow the manufacturer's drying times, which can vary depending on environmental conditions. Ensure that the lacquer is fully cured before subjecting it to any mechanical stress.

5. Equipment Cleanup: Clean your spray equipment immediately after use with an appropriate solvent to prevent the lacquer from hardening inside the gun.

6. Safety Precautions: Use proper personal protective equipment (PPE), including gloves, goggles, and a respirator, to avoid inhalation of fumes and contact with the skin.

Always refer to the specific technical data sheet provided by NOVOL for detailed instructions and safety information tailored to your application.