Refinish System DELTRON GRS D8131 UHS CLEARCOAT LACQUER

The Deltron GRS D8131 UHS Clearcoat is an ultra-high solid, two-component clear lacquer designed for excellent gloss and durability, especially in refinishing applications. Here's a quick guide for its usage:

1. Preparation

• Surface : Make sure the basecoat is dry and clean before applying the clearcoat.
• Temperature : Use in a well-ventilated area within the recommended temperature range (typically 20°C-25°C for optimal drying).

2. Mixing Ratio

• Mix the D8131 UHS Clearcoat with the recommended hardener (e.g., Deltron hardeners) based on the temperature and drying time needed.
• Ratio : Usually, a 2:1 mix of clearcoat to hardener is standard, though this can vary based on conditions and the hardener selected.
• Stir thoroughly to ensure a uniform mix.

3. Application

• Spray Gun : Use a compliant HVLP or conventional spray gun, following the recommended tip size (typically 1.2-1.3 mm).
• Coats : Apply 1.5-2 coats, allowing for flash-off time between each coat (approximately 5-10 minutes).
• Distance : Keep a consistent distance from the surface to ensure an even application.

4. Drying

• For air-dry conditions : Expect full drying within approximately 24 hours at 20°C.
• For baked conditions : Curing can take 15-30 minutes at 60°C, depending on your shop setup.

5. Post-Application

• Once dry, the clearcoat can be polished if needed to achieve a high-gloss finish.

This product offers high resistance to chemicals and environmental damage, making it ideal for a long-lasting, durable finish on automotive surfaces. Always consult the technical datasheet for specifics on temperature, gun setup, and hardener recommendations tailored to your environment.