TROTON GOLDLINE 095 HS CLEARCOAT HS 2:1 - 5 LITRE

TROTON GOLDLINE 095 HS Clearcoat is a high-quality, two-component clearcoat designed for automotive refinishing. Here are the general usage instructions:

Mixing Ratio:

• HS 2:1 means the clearcoat is mixed with a hardener in a 2:1 ratio. For example:
  • 2 parts of TROTON GOLDLINE 095 HS Clearcoat
  • 1 part of the appropriate hardener (usually TROTON HS hardener, but always confirm with product instructions for compatibility).

Application:

1. Surface Preparation: Ensure the surface is clean, dry, and free from contaminants like dust, oil, and grease. It's recommended to sand the surface before applying the clearcoat for better adhesion.

2. Mixing: Mix the clearcoat and hardener thoroughly. If needed, you can also add a thinner to achieve the desired viscosity, depending on the application method (e.g., spraying).

3. Spray Application:

   • Apply in 2 to 3 light coats.
   • Allow each coat to flash off (dry) for about 5-10 minutes before applying the next.
   • Ensure a consistent, even coverage to avoid runs or sags.
   • If necessary, use a spray gun with a nozzle size suitable for clearcoats (usually around 1.3mm to 1.5mm).

4. Drying:

   • After the final coat, allow the clearcoat to dry. This can take 16-24 hours at room temperature for full curing.
   • You can speed up drying time by using a heat lamp or baking booth, if required.

5. Polishing: Once the clearcoat is fully cured, you can polish it to a high-gloss finish if desired.

Important Tips:

• Always follow the specific manufacturer’s recommendations on mixing ratios, application techniques, and curing times for best results.
• Ensure proper ventilation when applying clearcoat, as it contains solvents that can be harmful.
• Wear protective gear, including gloves, a respirator, and safety goggles.